Firstly, check that you have the “Water” or “Water-pump” switch on.

Secondly, is the water tank full? If not, you will be able to use your hose to fill this.

If it is still not working and the tank is full. There may be an air pocket stuck in the tank. This is common and can be solved using the below steps.

1.Begin filling the water tank with the green hose

2. Turn on the water pump

3. Turn on/ Open the tap so the water is flowing constantly

4. Wrap a towel (or similar) around the green hose where it is connected to the filling whole on the vehicle (This stops any further air going into the pump).

These steps create a vacuum and helps flush out the air in the pump.

If you are still having issues with the water, give us a call!